Part Number: 38-0252

Application: Custom Application

Details:
Gas tank has a left side petcock opening. It features a pop-up type gas cap, and flush lower mounts. The 6" stretch is to the back of the tank which does not affect the mounts. Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion. Check the petcock opening, making sure the petcock can be easily installed. The petcock fitting should be masked or plugged during painting for easy installation of the petcock. *Note: UPS may consider this part as packaged " oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

UOM: 1 - EA
Style: Image


Tech. Notes:
The distance from the back of the tunnel to the rear mount hole is 9-1/4" . The distance from the front of the tunnel to the center of the front mount is 6 1/2" .

Measurements: Top Length: 23.5" Bottom Length: 23.5" Rear Width: 3.5" Front Width: 11" Rear Height: 3" Front Height: 9.5" Front Tunnel Height: 4" Rear Tunnel Height: 3" Tunnel Length: 25"

Country of Origin: Imported